West Texas LiDAR Project

The West Texas LiDAR project was completed for the USGS in 2019.  The data can be accessed in Equator by clicking below.

Access USGS Data
West Texas LiDAR Coverage Map
West Texas LiDAR Contours Sanderson

The West Texas LiDAR Project 

The West Texas LiDAR project was completed between February 16 and May 14, 2019. The following counties were included in the survey: Culberson, Jeff Davis, Reeves, Presidio, Brewster, Pecos, Terrell, Val Verde, Crockett, Crane, Ward, Maverick, Dimmit, Kinney, Webb, Zapata, and Jim Hogg. The survey was ordered to support the Federal Emergency Management (FEMA) Risk Mapping, Assessment, and Planning (MAP) program, the National Resources Conservation Service (NRCS) high resolution elevation enterprise program, and the 3DEP mission.

Access USGS Data

LiDAR Data Collection

In total, 32,494 square miles were surveyed as part of the West Texas LiDAR acquisition project. The survey was completed by a joint venture of Merrick-Surdex. Point cloud data was collected using Optech Galaxy lidar sensors. The Galaxy is a high performance sensor that is capable of surveying large areas efficiently.

Access USGS Data
Grand Falls Texas LiDAR Point Cloud
Pecos River Texas Cross Section from LiDAR

LiDAR Data Accuracy 

The survey was completed to a quality level of 2 (QL2) in accordance with USGS Lidar Base Specification 1.3. After the survey was complete, a vertical accuracy control report was prepared to summarize the non-vegetated vertical accuracy (NVA) and vegetated vertical accuracy (VVA). The NVA and VVA were tested to be 11.2 cm (4.4 inches) and 20.8 cm (8.2 inches), respectively, to a 95% confidence level.

Access USGS Data

Texas Cities/Towns covered in the LiDAR Survey

As part of the West Texas LiDAR survey, the following cities/towns were included:

  • Nuevo Laredo
  • Elm Creek
  • Del Rio
  • Sanderson
  • Marathon
  • Alpine
  • Marfa
  • Fort Davis
  • Balmorhea
  • Grandfalls
  • Coyanosa
  • Fort Stockton
  • Sheffield
  • Iraan
Access USGS Data
Bridge cross section from 3D topography in Equator mapping software

What if this LiDAR doesn’t cover my project site?

If you are looking for topographic data that falls outside of the West Texas project extents, please check out the USGS Topographic Map page for more information.

Access USGS Data

Why should I use Equator to access the West Texas LiDAR Survey?

  • Centimeters of accuracy from your home or office, in-real time

  • Find topographic data in your area using the built in search engine

  • Combine LiDAR data with your own on our innovative 3D mapping platform

Access USGS Data